Water Shut-Off Tool Kit
“If you have to dig up one less corporation, it pays for itself!” - Owner of N&M Excavation
The Niez tech Water Shut-Off Tool (Plug Saw) cuts and and plugs LIVE water service lines. A valve can then be installed over the plug. It replaces the need for crimping, freezing, or “doing it live”
Applications:
- Repair leaking pipe without access to corporation valve
- Cut waterlines out of way of trench box
- Replace Broken Curb-stops
- Add a valve to a live line
Advantages:
- Quick (3 minuets)
- Perfect Repair (no need for "uncrimping” a line)
-
The Plugging Machine cuts pipe diameters from 3/4" to 1 1/4" and installs a leak-tight plug. This is done under pressure by alignments and mechanical advantages designed into the machine. The Plugging Machine works with all CTS plastic and Type K copper pipe. Once the pressurized pipe is plugged, a curb stop can be installed onto the pipe over the plug. The plug can then be removed and the valve closed. This allows one to cut and later repair a water service pipe without the need to crimp or freeze the line.
-
200 p.s.i. Maximum working Pressure at 100℉
250℉ Maximum Temperature Rating at 100 p.s.i.
The working pressure or temperature rating is reduced accordingly if any attachment, valve or fitting, subjected to pressure or temperature during the drilling operation, has a maximum working pressure or temperature rating less than that specified above.
-
● ¾”, 1”, 1 ¼” Plugs
● ¾”, 1”, 1 ¼” Blades
● ¾”, 1”, 1 ¼” Jaws
● Plug Driving Bit
● Plug Tightening Socket and Allen Drive
● Lubricating Bee’s Wax
● Plastic Case
-
-
The Machine can be used with any full bore “Ball Type” Curb Stop.
Sizes
| Marked Size | Jaw ID | Plug OD | OD for Blade |
|---|---|---|---|
| ¾” | ⅞” | ¾” | ⅞” |
| 1” | 1 ⅛” | 1” | 1 ⅛” |
| 1 ¼” | 1 ⅜” | 1 ¼” | 1 ¼” |